|
|
|
|
|
Fargo 3-Panel YMC Full-Color Ribbon (750 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMC ribbon consist of three panels (Y=Yellow, M=Magenta, C=Cyan) and is used for printing full-color cards where composite black is acceptable. A composite black is created by mixing YMC and will work for you if you’re not printing barcodes and if you don’t need crisp black text. If you need sharp, black text, use a YMCK ribbon which has a separate black (K) panel for printing black text and graphics.
This ribbon is used for single-sided card printing.
|
|
|
|
|
|
|
Fargo 5-Panel YMCKK Full-Color Ribbon with Two Resin Black Panels (500 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCKK ribbon is a four-panel YMCK color ribbon with an extra black panel for printing on the back side of a card. It is used when you want to print full-color on one side of a card and monochrome on the other side.
The 5 panels of a YMCKK ribbon correspond to (Y=Yellow, M=Magenta, C=Cyan, K=Black, K=Black).
This ribbon is used for dual-sided card printing.
|
|
|
|
|
|
|
|
Fargo 4-Panel YMCK Full-Color Ribbon with Resin Black Panel (500 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCK ribbon consist of four panels (Y=Yellow, M=Magenta, C=Cyan, B=Black) and is used for printing full-color cards where crisp black text and graphics is required (e.g. for barcodes).
If crisp black text and graphics is not required, a YMC ribbon can be used instead.
This ribbon is used for single-sided card printing.
|
|
|
|
|
|
|
|
Fargo 5-Panel YMCKH Full-Color Ribbon with Resin Black and Heat Seal Panel (500 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCKH ribbon is the same as a YMCK ribbon but has an additional “H” heat seal panel. The heat seal panel helps the resin adhere more strongly to the surface of card, making it perfect for use with uneven cards or cards with slight indents or bumps and is ideal for Smart card badging operations.
The 5 panels of a YMCKH ribbon correspond to (Y=Yellow, M=Magenta, C=Cyan, K=Black, H=Heat Seal) and is used for single-sided card printing.
|
|
|
|
|
|
|
|
Fargo 5-Panel YMCKI Full-Color Ribbon with Resin Black and Inhibitor Panels - 500 Cards with YMC on Front and KI on Back (this is Only when Foil Hologram is on Back of Card); 500 Single-Sided YMCKI Cards; or 250 Cards with YMCKI on Both Front and Back. For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCKI ribbon is the same as a YMCK ribbon but has an additional “I” inhibitor panel which can be used to prevent printing on specific parts of cards such as magnetic stripes, chips and signature panel.
The 5 panels of a YMCKI ribbon correspond to (Y=Yellow, M=Magenta, C=Cyan, K=Black, I=Inhibitor) and is used for single-sided card printing.
|
|
|
|
|
|
|
|
Fargo 5-Panel YMCFK Full-Color Ribbon with Resin Black and Dye-based Fluorescing Panels (500 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCFK ribbon consist of five panels. The YMC (Y=Yellow, M=Magenta, C=Cyan, B=Black) panels are used for full-color printing, the fluorescing (F) panel for UV text, and the black monochrome (K) panel for text and graphics.
The fluorescing panel is used to print grayscale text or images that are only visible with ultraviolet (UV) light and are used to provide added card security.
This ribbon is used for single-sided card printing.
|
|
|
|
|
|
|
|
Fargo 5-Panel YMCKK Half-Panel Full-Color Ribbon (750 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCKK ribbon is a four-panel YMCK color ribbon with an extra black panel for printing on the back side of a card. It is used when you want to print full-color on one side of a card and monochrome on the other side.
The 5 panels of a YMCKK ribbon correspond to (Y=Yellow, M=Magenta, C=Cyan, K=Black, K=Black).
This ribbon is used for dual-sided card printing.
|
|
|
|
|
|
|
|
Fargo 4-Panel YMCK Half-Panel Ribbon (1000 Images/Roll). For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCK ribbon consist of four panels (Y=Yellow, M=Magenta, C=Cyan, B=Black) and is used for printing full-color cards where crisp black text and graphics is required (e.g. for barcodes).
If crisp black text and graphics is not required, a YMC ribbon can be used instead.
This ribbon is used for single-sided card printing.
|
|
|
|
|
|
|
|
Fargo 7-Panel YMCKI-KI Full-Color Ribbon with Two Resin Black and Two Inhibitor-Panels - 400 Cards with YMCKI on Front and KI on Back. For use with Fargo HDP5000 ID Card Printers.
A Fargo YMCKI-KI ribbon is used for dual-sided printing. The YMCKI panels provide for full-color printing on the front side with an inhibitor panel and black monochrome printing on the back side with an inhibitor panel. The inhibitor panels are used to prevent printing on specific parts of cards such as magnetic stripes, chips and signature panel.
The 7 panels of a YMCKI-KI ribbon correspond to (Y=Yellow, M=Magenta, C=Cyan, K=Black, I=Inhibitor, K=Black, I=Inhibitor) and is used for dual-sided card printing.
|
|
|
Ask A Question
Request A Quote
Get Volume Pricing
